Application Instructions
Step-by-Step WallStars Application Instructions
Step 1. Find a “Can’t Miss Spot” to show off your WallStars – Make sure to pick a smooth surface (painted drywall is best) with enough room for your WallStars.
Step 2. Clean the “chosen” spot on the wall – It is very important that you clean the wall with a damp cloth and allow it to dry completely (24 hours is best) before sticking your WallStars.
Note: Use warm water only! Soap or cleaning supplies may be harmful to the magic adhesive.
Step 3. Flatten your WallStars – The WallStars will come in a poster tube, unroll the WallStars and lay it out flat. Allow enough time for the WallStars to flatten out prior to sticking.
Step 4. Find a Friend – WallStars are much easier to apply with (at least) four hands.
Step 5. Peel WallStars from the backing paper – With someone holding each side, peel your WallStars from the backing paper evenly from top to bottom.
Step 6. Stick your WallStars in your “chosen” area – With the help of your friend, stick the top of the WallStars to the wall and slowly work your way down using light pressure. If you don’t get it exactly right the first time, no worries, it is easy to remove your WallStars and start over.
Step 7. Smooth out the Bubbles/Wrinkles – Working from the middle to the edges, smooth out any bubbles or wrinkles in your WallStars.
Step 8. Congratulations you have hung your WallStar!
Important: Make sure to keep the backing paper and poster tube. It will make it much easier to transport the WallStar in the event you want to give it a new location.
Comments
Got something to say?
You must be logged in to post a comment.